Dynalink Wireless Setup Guide

To setup the Wireless:

  • Connect modem to power
  • Connect modem to DSL
  • Connect modem to computer (i.e.: PC or laptop)

On your computer, launch your Web Browser (e.g.: Internet Explorer, Chrome or Firefox).

Step 1

Type 192.168.1.1 into the address bar.

Step 2

A popup will then ask for a Username and Password.

Type 'admin' for both.

Step 3

Click Wireless on the left.

Step 4

Tick 'Enable Wireless'.

Step 5

Enter the Wireless name into the SSID.

The Wireless name is the name that shows on your devices so you can identify what wireless to connect to.

Step 6

Click 'Apply/Save'

Step 7

Go to 'Wireless' and then 'Security' on the left.

Step 8

Change the 'Wireless Security' to 'Mixed WPA/WPA2 Personal'

Step 9

Enter a wireless password where it says 'WPA Pre-Shared Key'

Your password needs to be 8 characters or more.

This will be used to connect your devices onto the wireless.

Step 10

Click 'Apply/Save'

Have more questions? Submit a request

Comments

  • Avatar
    malcolm guy

    It isn't coming up with the wireless on left

Powered by Zendesk